1911/2011 Parts

Follower for BUL/KMR magazines compatible with original...

Follower for BUL/KMR magazines compatible with original... 2

Magazine / Base Pad for KMR

Follower for BUL/KMR magazines compatible with original spring - Lucky Delta

It allows the load of 23 rounds without the need to change the original magazine spring. Not compatible with Mec Gar magazines.

Brass 4mm base pads for 2011/SAS magazine, black - RC Tech

Magazine / Base Pad for 1911/2011

Brass 4mm base pads for 2011/SAS magazine, black - RC Tech

RC-2011-04-BR

€37.00

Magazine / Base Pad

Magazine for Kimber Ten II, Bul SAS M5/II and KMR Orca/Emiq, 20 rounds, Cal. 9mm, 3pcs...

MGK20M-3PCS

€207.90

Alluminium pad NOT COMPATIBLE WITH MAGWELL. The magazine used with KMR Orca does not fit into the standard IPSC box; you must use the KMR-0111-01201-0101 pad.

Caricatore per 2011 e cloni Cal. 9mm, 20 colpi (133.80mm)...

Caricatore per 2011 e cloni Cal. 9mm, 20 colpi (133.80mm)... 2

Magazine / Base Pad for 1911/2011

Caricatore per 2011 e cloni Cal. 9mm, 20 colpi (133.80mm) - SF Meccanica

SFM-2011-20-9

€59.00

Compatible with magwell.

Magazine / Base Pad for 1911/2011

Magazine for 1911 Cal. .45ACP, 10 rounds, AFC finish - Mec-Gar

MGCG4510A

€45.00

Magazine / Base Pad for 1911/2011

Magazine for 2011,2311 Prodigy and clones, Cal. 9mm, 22-Round - Mec-Gar

MG20112200A

€75.00

STI/STACCATO MADE CHANGED IN 2024 TO THEIR 2011 PISTOLS. THIS MAGAZINE WILL NOT WORK IN PISTOLS AFTER THE CHANGES WERE MADE

Magazine / Base Pad for 1911/2011

Magazine for 1911 EMP full size Cal. 9, 10 rounds, blued - Springfield Armory

SA-PI6069

€42.00

Magazine / Base Pad

Spring 13 coils + follower kit for BUL/KMR magazines - RC Tech

RC-220004001-13

€25.00

Suitable for 126 mm and 140 mm magazines.

Spring 11 coils + follower kit for BUL/KMR magazines - RC...

Spring 11 coils + follower kit for BUL/KMR magazines - RC... 2

Magazine / Base Pad

Spring 11 coils + follower kit for BUL/KMR magazines - RC Tech

RC-220004001-11

€25.00

Suitable for 126 mm and 140 mm magazines.

1911/2011 spare parts

Grip Screw Set 4 pc 3/32" for 1911 Pistols, black - X-Ray Parts

XR-1911-GRPSCRW-332-B

€14.00

1911/2011 spare parts

Mainspring Housing Pin for 1911 without magwell

BT-1911-MSHP

€5.00

Trigger for 1911/2011

Trigger shoe R20 for 1911 - Hornady-Pacific

HP-030014

€12.00

Not compatible with any type of holster.

Base pad +2/+3 rounds (141mm) for STI with Mec-gar...

Base pad +2/+3 rounds (141mm) for STI with Mec-gar... 2

Product available with different options

Magazine / Base Pad for 1911/2011

Base pad +2/+3 rounds (141mm) for STI with Mec-gar magazine - Toni System

TS-PADSTI141MG

€45.00

View

Pad +3/4 rounds for SAS/ Para Ordnance magazines - RC Tech

Magazine / Base Pad for 1911/2011

Pad +3/4 rounds for SAS/ Para Ordnance magazines - RC Tech

RC-SAS141

€37.00

Magazine for 2011 and clones, Cal 9mm, 22 rounds with...

Magazine for 2011 and clones, Cal 9mm, 22 rounds with... 2

Magazine / Base Pad for 1911/2011

Magazine for 2011 and clones, Cal 9mm, 22 rounds with extended pad for Optics division...

SFM-2011-141

€59.00

Aluminium 3mm base pads for 2011/SAS magazine, black - RC...

Aluminium 3mm base pads for 2011/SAS magazine, black - RC... 2

Magazine / Base Pad for 1911/2011

Aluminium 3mm base pads for 2011/SAS magazine, black - RC Tech

RC-2011-03-BLK

€34.00

1911/2011 spare parts

Recoil system for 1911/2011 with 5" Bull barrel, Edward Riviera B.O.S.S. special...

DPM-1000226

€120.00

1911/2011 spare parts

Recoil system for Springfield DS Prodigy/ Emissary, 5" barrel, cal. 9mm/.45ACP - DPM

DPM-1000269

€117.00

1911/2011 spare parts

Recoil system for 1911 and clones with 5" barrel with bushing - DPM

DPM-1000088

€115.00

1911/2011 spare parts

Recoil system for 1911/2011 with 5" Bull barrel, Edward Riviera special edition - DPM

DPM-1000083

€115.00

Magazine for 2011 and clones, Cal. 9mm, 18 rounds - SF...

Magazine for 2011 and clones, Cal. 9mm, 18 rounds - SF... 2

Magazine / Base Pad for 1911/2011

Magazine for 2011 and clones, Cal. 9mm, 18 rounds - SF Meccanica

SFM-2011-18-9

€45.00

Aluminum tactical magwell for 2011 STACCATO P-XC-XL -...

Aluminum tactical magwell for 2011 STACCATO P-XC-XL -... 2

Grips / Funnels for 1911/2011

Aluminum tactical magwell for 2011 STACCATO P-XC-XL - Toni System

TS-MSTAT-BK

€102.00

Weight 27,6 g / 0,97 oz Material: Aluminum

Magazine / Base Pad for 1911/2011

Spring for 1911 magazine Cal. 9 - SF Meccanica

SFM-MOL-CAR-1911

€6.00

Follower for 1911 magazine Cal. 9 SF Meccanica, black -...

Follower for 1911 magazine Cal. 9 SF Meccanica, black -... 2

Magazine / Base Pad for 1911/2011

Follower for 1911 magazine Cal. 9 SF Meccanica, black - SF Meccanica

SFM-EL-9MM-1911-BK

€6.00

1911/2011 spare parts

1911 bushing wrench - Eemann Tech

ET-030110

€16.00

Magazine reinforced spring for 1911 magazine - Toni System

in stock

1911/2011 spare parts

Magazine reinforced spring for 1911 magazine - Toni System

TS-MCR1911

€9.00

Not suitable for 9mm caliber magazines, only for .45ACP caliber magazines.

Aluminium pad for Metalform/Cobra magazines for 1911 Cal....

Aluminium pad for Metalform/Cobra magazines for 1911 Cal.... 2

Magazine / Base Pad for 1911/2011

Aluminium pad for Metalform/Cobra magazines for 1911 Cal. 9mm, black - Armanov

AV-MP1911MFBR-BL

€25.00

Weight: 14g Legal for: IPSC Classic Division and IDPA

Magazine for Kimber Ten II, Bul SAS M5/II and KMR... 2

Magazine / Base Pad for 1911/2011

Magazine for Kimber Ten II, Bul SAS M5/II and KMR Orca/Emiq, 20 rounds, Cal. 9mm - Mec-Gar

MGK20M

€77.00

Alluminium pad NOT COMPATIBLE WITH MAGWELL. The magazine used with KMR Orca does not fit into the standard IPSC box; you must use the KMR-0111-01201-0101 pad.

Magazine for Springfield Prodigy 1911DS/Staccato/STI 18...

Magazine for Springfield Prodigy 1911DS/Staccato/STI 18... 2

Magazine / Base Pad for 1911/2011

Magazine for Springfield Prodigy 1911DS/Staccato/STI 18 rounds, Cal. 9mm, AFC - Mec-Gar

MG20111800A

€64.00

Plastic pad. STI/STACCATO MADE CHANGED IN 2024 TO THEIR 2011 PISTOLS. THIS MAGAZINE WILL NOT WORK IN PISTOLS AFTER THE CHANGES WERE MADE

Sight / Dot for 1911/2011

Front sight for Taurus PT 1911 - HI-VIZ

HV-TR1911

€36.50

Complete with 6 interchangeable sights, key, and case.

NEW Recoil guide with plug 2011 and 1911, 4.25" - X-ray

1911/2011 spare parts

NEW Recoil guide with plug 2011 and 1911, 4.25" - X-ray

XR-GR21920-425

€74.00

NEW Recoil guide with plug 2011 and 1911, 3.5" - X-ray

NEW Recoil guide with plug 2011 and 1911, 3.5" - X-ray 2

In Stock

1911/2011 spare parts

NEW Recoil guide with plug 2011 and 1911, 3.5" - X-ray

XR-GR21920-35

€74.00

Brass pad for Metalform/Cobra magazines for 1911 Cal. 9mm...

Brass pad for Metalform/Cobra magazines for 1911 Cal. 9mm... 2

Magazine / Base Pad for 1911/2011

Brass pad for Metalform/Cobra magazines for 1911 Cal. 9mm - Armanov

AV-MP1911MFBR-PO

€29.00

Weight: 42g Legal for: IPSC Classic Division and IDPA

Curved Trigger 1911, circles - X-Ray Parts

Trigger for 1911/2011

Curved Trigger 1911, circles - X-Ray Parts

XR-1911-TS2-C

€32.00

Sight / Dot for 1911/2011

Fron sight with 1.5mm fiber for SPF09KI kit for Kimber - LPA

LPA-MP253F

€28.00

Base: 10 mm x 7.85 mm Total height: 5.5 mm Width: 3.3 mm

Sight / Dot for 1911/2011

Adjustable Rear sight with green fiber + front sight with red fiber , for Kimber 1911 -...

LPA-SPF09KIFO

€103.00

Rear sight: 1mm green fiber; Front sight: 1.5mm red fiber.

Speed Line pad for 2011 magazines, black - Armanov

Magazine / Base Pad for 1911/2011

Speed Line pad for 2011 magazines, black - Armanov

AV-MP2011-BL

€31.00

Anodized 7075 Aircraft Grade Aluminium Weight: 12 g Compatible with: Atlas Gunworks Magazines BUL Armory SAS II Magazines STI/Staccato 2011 Magazines Legal for IPSC Open Division; IPSC Standard Division; IPSC Production Division

In Stock

1911/2011 spare parts

Firing Pin for 1911/2011 - X-Ray Parts

XR-FP-1911-2011

€25.00

58.15 mm long Point diameter 1.55 mm Head diameter 3.80 mm

Springfield Armory Parts

Titanium firing pin for 1911 cal. 9mm/10mm - Springfield Armory

SA-PI0909T

€37.50

Titanium Firing Pin for 9mm/10mm. Fits both 5" and 4.25" models.

1911/2011 spare parts

Grips Bushing Standard Profile Set for 1911 (Set 4 pcs.) - BT

BT-1911-BSH-GRP-STD

€12.00

Total height: 6.70mm Diameter of the non-threaded part: 6mm

Reverse plug for standard guide rods for 2011 - X-Ray Parts

1911/2011 spare parts

Reverse plug for standard guide rods for 2011 - X-Ray Parts

XR-REVPLG-2011

€15.00

External diameter: 12.50 mm Internal diameter: 8.45 mm Total length: 42.60 mm

1911/2011 spare parts

Mainspring Housing Pin for 1911 with magwell

BT-1911-MSHP-WM

€5.00

Length: 28.70mm

1911/2011 spare parts

Steel guide rod with checkered spring plug for 1911, 4" barrel

XR-RDSRT-4

€30.00

Guide rod length: 28.60mm Plug length: 27.25mm

Extractor for 1911/2011 Cal. 9/40 with Firing Pin Safety

1911/2011 spare parts

Extractor for 1911/2011 Cal. 9/40 with Firing Pin Safety

11-ES-9-40-FPS-BK

€30.00

1911/2011 spare parts

Bushing for 1911, 4" barrel

BT-BU11-4IN

€19.90

Ø ext: 17.70mm Ø int: 15.70mm Total length: 12.70mm

SpidErgo grips for 1911, black - Armanov

Grips / Funnels for 1911/2011

SpidErgo grips for 1911, black - Armanov

AV-PG1911

€74.50

Grip Size Guide Simple chart to determine which grip size you need. Please keep in mind that all hands are different and some shooters may prefer smaller/larger grip than usual. This chart should serve as a rough reference to make your choice easier. You have two options of measuring your hand size.

Trigger for 1911/2011

Flat trigger for 2011, gold - X-Ray Parts

XR-2011-FLT-GD

€32.00

Trigger Length: 14.4 mm Total Length: 57.70 mm

In Stock

1911/2011 spare parts

Extended magazine release button 2011

BT-EMR11-2011

€49.00

Front sight for 1911/2011 with 1.5mm red fiber, checkered...

Front sight for 1911/2011 with 1.5mm red fiber, checkered... 2

Sight / Dot for 1911/2011

Front sight for 1911/2011 with 1.5mm red fiber, checkered - Eemann Tech

ET-130421

€67.50

Specifications: Fiber Optics Rod Diameter: 1.5 mm Fiber Optics Rod visible length: 8 mm Measures: Height: .160″(4.1mm) Wide: .100″(2.5mm) Dovetail size: .300″ (7.6mm) The set includes: Front Sight – 1 pc. Fiber Optics Rod, Red, 1mm – 2 pcs.

Sight / Dot for 1911/2011

Adjustable rear sight for Remington 1911 - LPA

LPA-TRT50PO07

€92.00

Compatible with Remington 1911 R1 10mm Hunters and Remington 1911 R1 Limited line.

1911/2011 spare parts

Firing pin for 1911 Cal. 45 WITHOUT Firing Pin Safety - X-ray Parts

XR-PE-1911-45

€25.00

Point diameter: 2.30mm Back diameter: 3.70mm Total length: 58.30mm Weight: 5g

Revolver

Adjusting Key for LPA Sights - LPA

LPA-SD1

€3.00

1911/2011 spare parts

Extractor for 1911/2011 Cal. 45 WITHOUT Firing Pin Safety - X-ray Parts

XR-11-ES-45-B

€30.00

Black color

1911/2011 spare parts

Kit for Extractor AFT 1911/2011 cal. 9/40 - Xray parts

XR-19-EA3

€10.00

1911/2011 slim ambidextrous safety - X-Ray Parts

1911/2011 slim ambidextrous safety - X-Ray Parts 2

In Stock

1911/2011 spare parts

1911/2011 slim ambidextrous safety - X-Ray Parts

XR-11SA-SLIM

€79.00

MOE 1911 Grip Panels, TSP Texture, Black - Magpul

Grips / Funnels for 1911/2011

MOE 1911 Grip Panels, TSP Texture, Black - Magpul

MP-MAG544

€27.00

Grip Safety for 1911 / 2011 - X-Ray Parts

Grip Safety for 1911 / 2011 - X-Ray Parts 2

Product available with different options

1911/2011 spare parts

Grip Safety for 1911 / 2011 - X-Ray Parts

XR-1911-GRPSFY

€70.00

Material: Steel Fitting may be required.

View

Replace Kit (Spring + Follower) for Bul SAS II Magazine -...

Replace Kit (Spring + Follower) for Bul SAS II Magazine -... 2

Magazine / Base Pad

Replace Kit (Spring + Follower) for Bul SAS II Magazine - Bul

BUL-MAG-KIT

€11.00

Magazine 26 Rounds cal. 9 for BUL SAS II Open and KMR...

Magazine 26 Rounds cal. 9 for BUL SAS II Open and KMR... 2

Magazine / Base Pad

Magazine 26 Rounds cal. 9 for BUL SAS II Open and KMR Orca / Emiq - Bul

BUL-MAG-SASII-26-B

€95.00

Polymer base pad

1911/2011 spare parts

Grips Bushing Low Profile Set for 1911 (Set 4 pcs.) - BT

BT-1911-BSH-GRP-LOW

€12.00

1911/2011 spare parts

Grips Screws Low Profile Set for Grips Slim 1911 (Set 4 pcs.) - BT

BT-1911-GRPSCRW-LOW

€12.00

Grip Screw Set 4 pc Torx T15 for 1911 Pistols - X-Ray Parts

1911/2011 spare parts

Grip Screw Set 4 pc Torx T15 for 1911 Pistols - X-Ray Parts

XR-1911-GRPSCRW-SET

€14.00

Set 4 pieces Material: Steel

Mainspring Housing Pin for STI / Staccato 2011 with...

Mainspring Housing Pin for STI / Staccato 2011 with... 2

1911/2011 spare parts

Mainspring Housing Pin for STI / Staccato 2011 with Magwell - BT

BT-2011-MSHP-WM

€5.00

Total length: 36,1 mm / 1,421 inch Material: Steel

1911/2011 spare parts

Hammer Strut Pin for 1911 / 2011 - BT

BT-1911-HSP

€4.00

Aluminium Main Spring Housing for 1911, Black - BT

1911/2011 spare parts

Aluminium Main Spring Housing for 1911, Black - BT

BT-AL-MSH-1911

€35.00

Weight: 18 gr / 0,63 oz

Magazine Catch Lock Pin for 1911 / 2011 - BT

1911/2011 spare parts

Magazine Catch Lock Pin for 1911 / 2011 - BT

BT-1911-MCLP

€6.00

1911/2011 spare parts

Sear Pin 1911 / 2011 - BT

BT-1911-SP

€5.00

1911/2011 spare parts

1911 / 2011 Hammer Pin - BT

BT-1911-HP

€5.00

1911/2011 spare parts

Mainspring Cap 1911 / 2011 - BT

BT-1911-MSC

€6.00

Mainspring Housing Pin Retainer 1911 / 2011 - BT

1911/2011 spare parts

Mainspring Housing Pin Retainer 1911 / 2011 - BT

BT-1911-MSH-RPIN

€6.00

Cap Retention Pin for 1911 / 2011 Mainspring Housing - BT

1911/2011 spare parts

Cap Retention Pin for 1911 / 2011 Mainspring Housing - BT

BT-1911-MSH-RET-PIN

€4.00

Grips / Funnels for 1911/2011

Grips for 1911 Full Size in G10 1911 Palm Swell Veloce (Magwell Bottom Cut), Black -...

LG-1911PSV-AB

€81.00

REQUIRED: Thin Bushings

1911/2011 Recoil Spring Plug - X-Ray Parts

1911/2011 spare parts

1911/2011 Recoil Spring Plug - X-Ray Parts

XR-RSP-1911

€15.00

Material: Steel Total lenght: 27.67 mm

Hammer Commander for 1911/2011 - X-Ray Parts

Hammer Commander for 1911/2011 - X-Ray Parts 2

Product available with different options

1911/2011 spare parts

Hammer Commander for 1911/2011 - X-Ray Parts

1911-CMMD

€43.00

View

Hammer High Force for 1911/2011 - X-Ray Parts

Hammer High Force for 1911/2011 - X-Ray Parts 2

Product available with different options

1911/2011 spare parts

Hammer High Force for 1911/2011 - X-Ray Parts

1911-HGFC

€43.00

View

Magazine 15 round Cal. 40 S&W with Polymer Pad for Bul SAS 2 - Bul

Magazine 15 round Cal. 40 S&W with Polymer Pad for Bul SAS 2 - Bul 2

Product available with different options

Magazine / Base Pad

Magazine 16 round Cal. 40 S&W with Polymer Pad for KMR ORCA Bul SAS 2 - Bul

BUL-MAG-SASII-40-B

€34.00

It requires a dedicated base pad to use with magwell

View

Hammer Witness for 1911/2011 - X-Ray Parts

1911/2011 spare parts

Hammer Witness for 1911/2011 - X-Ray Parts

1911-WTNS

€43.00

Magazine / Base Pad for 1911/2011

Magazine COLT 1911 cal. 45 8 rounds, Nickel Finish - ACT Mag

ACT-AM01CO4508PFN

€24.00

With Polymer Pad

Palm Swell GridLOK Brass Grips 1911, Magwell Cut, texture Aggressive - Lok Grips

Grips / Funnels for 1911/2011

Palm Swell GridLOK Brass Grips 1911, Magwell Cut, texture Aggressive - Lok Grips

LG-1911PSGLB-R-FS-FL

€129.00

Includes screws & O-rings Fits with Magwell

Grips for 1911 Full Size in G10 FS1911 Palm Swell Veloce - Lok Grips

Grips / Funnels for 1911/2011

Grips for 1911 Full Size in G10 FS1911 Palm Swell Veloce (Standard Bottom Cut) - Lok Grips

LG-1911PSV-AB

€81.00

Thin Bushings, black torx scews and o-rings included

Ejector Pin for 1911 / 2011 - X-Ray Parts

1911/2011 spare parts

Ejector Pin for 1911 / 2011 - X-Ray Parts

19-EJ-PIN

€4.50

Diameter: 1.60 mm / 0.063 inch

Magazine / Base Pad for 1911/2011

Standard Brass Magazine Pad for 1911 (Mec-Gar Magazine) - Toni System

TS-PADMNSO-BR

€30.00

Weight 36,7 g / 1.29 oz Material: Brass

2011 BUL Armory Red Dot Scope Mount A-Version, Black Color - Boss Components

2011 BUL Armory Red Dot Scope Mount A-Version, Black Color - Boss Components 2

Sight / Dot for 1911/2011

2011 BUL Armory Red Dot Scope Mount A-Version, Black - Boss Components

BC-BUL-RDSM-TYP-A-B

€99.95

Magazine / Base Pad for 1911/2011

Replacement Kit for Mec-gar 1911 Magazine 10 Round - Mec-gar

MG-GTS1911-2

€17.00

NEW VERSION

Magazine 1911 Cal. 45 8 rounds - SF Meccanica

Magazine 1911 Cal. 45 8 rounds - SF Meccanica 2

Product available with different options

Magazine / Base Pad

Magazine 1911 Cal. 45 8 rounds - SF Meccanica

SFM-1911-45-8

€26.00

8 round magazine for 1911 pistols in .45 caliber. Polymer pad

View

Product available with different options

1911/2011 spare parts

Ejector for 1911/2011

11-EJT

€22.00

Gunsmith installation required

View

Firing Pin Standard for 1911/2011 with Firing Pin Safety

In Stock

1911/2011 spare parts

Firing Pin Standard for 1911/2011 with Firing Pin Safety

11-FP-ST-SFTY

€29.00

Total length: 58.40mm Point diameter: 1.70mm

Product available with different options

1911/2011 spare parts

Firing Pin Standard for 1911/2011

11-FP-ST

€29.00

Total length: 58.20mm Point diameter: 1.60mm

View

Product available with different options

1911/2011 spare parts

1911/2011 Barrel Link - X-Ray Parts

XR-1911-BL

€10.00

View

Magazine 19 round with Polymer Pad for Bul SAS 2 - Bul

Magazine 19 round with Polymer Pad for Bul SAS 2 - Bul 2

Magazine / Base Pad

Magazine 18 round Cal. 9 with Polymer Pad for KMR Orca- Bul SAS 2 - Bul

BUL-MAG-SASII-18

€32.00

For use with magwell, the dedicated pad is required.

Extractor for 1911/2011 Cal. 45 with Firing Pin Safety

1911/2011 spare parts

Extractor for 1911/2011 Cal. 45 with Firing Pin Safety

11-ES-45-FPS

€30.00

Hammer Hidden for 1911/2011 - X-Ray Parts

1911/2011 spare parts

Hammer Hidden for 1911/2011 - X-Ray Parts

1911-HHD

€43.00

Trigger for 1911/2011

Curved Trigger 1911, triangles - X-Ray Parts

XR-1911-TS2-T

€32.00

Magazine 1911 9 mm 10 rounds - SF Meccanica

Magazine 1911 9 mm 10 rounds - SF Meccanica 2

In Stock

Magazine / Base Pad

Magazine 1911 9 mm 10 rounds - SF Meccanica

SFM-1911-9MM-10

€26.00

10 round magazine for 1911 pistols in 9mm caliber. Polymer pad

1911 Barrel Bushing Wrench, in G10, Texture Nova - Lok Grips

Tools / Workshop Equipment

1911 Barrel Bushing Wrench, in G10, Texture Nova - Lok Grips

LG-1911BBW-NOVA

€19.00

1911/2011 spare parts

Hammer Spring for 1911 / 2011 - MVM

MVM-04493

€10.00

Progressive Recoil Spring Match, for 1911 / 2011 - MVM

Product available with different options

1911/2011 spare parts

Progressive Recoil Spring Match, for 1911 / 2011 - MVM

MVM-02497

€11.00

View

Front Sight with Fiber Optic for 1911 - Eemann Tech

Sight / Dot for 1911/2011

Front Sight with Fiber Optic for 1911 - Eemann Tech

ET-13040

€69.50

Bomar Cut

Sight / Dot for 1911/2011

Adjustable Rear Sight with Fiber Optic, for 1911 and Clones (Bomar Cut) - LPA

LPA-TRT54FUFO

€98.00

1911/2011 spare parts

1911 Plunger Tube - X-Ray Parts

XR-1911PT

€19.00

Smooth Slide Stop for 1911/2011 - X-Ray Parts

Smooth Slide Stop for 1911/2011 - X-Ray Parts 2

1911/2011 spare parts

Minimal Slide Stop for 1911/2011 - X-Ray Parts

XR-HOSM

€36.00

Sight / Dot for 1911/2011

Adjustable Rear sight + front sight (with fiber optic), for Kimber 1911 - LPA

LPA-SPS09KI6F

€92.00

In stock

Thumb rest for Tanfoglio

Thumb rest 4 holes, for Left Hand Shooter - Toni System

TS-AD4DX

€45.50

Hole Spacing: 10 mm Right side for Left hand shooter

Product available with different options

Magazine / Base Pad for 1911/2011

Base Pad 2011 ALU - M-arms

MA-401

€27.00

View

Cobblestone OverMolded Rubber Grip Panels with Palm Swells - Hogue

Grips / Funnels for 1911/2011

Cobblestone OverMolded Rubber Grip Panels with Palm Swells - Hogue

HG-45090

€45.00

Magazine Pad for STI 2011 and Clones, for Open Division - Toni System

Magazine Pad for STI 2011 and Clones, for Open Division - Toni System 2

Available in 5 days

Magazine / Base Pad for 1911/2011

Magazine Pad for STI 2011 and Clones, for Open/Optics Division - Toni System

TS-PADSTIO

€45.00

Weight 34,4 g / 1,21 oz Material: Aluminum COMPATIBLE WITH MAGWELL

Grips / Funnels for 1911/2011

Magwell for Sti 2011 and Clones - BT

BT-MGW-2011

€85.00

Grips / Funnels for 1911/2011

Brass Magwell for X3D Short Grip for 1911 and Clones - Toni System

TS-MO3D1911-BR

€102.00

Weight: 92 g Recommended for X3D Grips SHORT Toni System

Aluminium Magwell for X3D SHORT Grips 1911 and Clones - Toni System

Grips / Funnels for 1911/2011

Aluminium Magwell for X3D SHORT Grips 1911 and Clones - Toni System

TS-M3D1911

€96.00

Weight: 32 g Material: Aluminium Recommended for X3D SHORT Grips Toni System

In Stock

Trigger for 1911/2011

Trigger short 2011 - X-Ray parts

XR-2011-TSH

€32.00

Grips / Funnels for 1911/2011

Grips for 1911 Full Size in G10 LOK Ops, Standard profile - Lok Grips

LG-1911LOKOPS

€73.00

Classic Main Spring Housing for 1911, Texture "Chain Link" - X-Ray parts

1911/2011 spare parts

Classic Main Spring Housing for 1911, Texture "Chain Link" - X-Ray parts

XR-MSH2

€39.00

Fits without Magwell

Classic Main Spring Housing for 1911, Texture "Checkered 25 LPI" - X-Ray parts

1911/2011 spare parts

Classic Main Spring Housing for 1911, Texture "Checkered 25 LPI" - X-Ray parts

XR-MSH1

€39.00

Steel main spring housing for 1911

1911 Government Guide Rod, with spring Plug- X-Ray Parts

1911/2011 spare parts

1911 Government Guide Rod, with spring Plug- X-Ray Parts

XR-RDSRT

€30.00

G.I. style guide rod with plug

Grips / Funnels for 1911/2011

MOE 1911 Grips Panel - Magpul

MP-MAG524

€32.00

1911/2011 spare parts

Magazine Release Button for STI - Toni System

TS-PSTI

€24.50

For assembly, it is necessary to drill the magazine release button and thread it M3 Material: Aluminum

Trigger for 1911/2011

Short Curved Trigger 1911 - X-Ray Parts

XR-1911-TS3

€32.00

Guancette in polimero con minigonna per 1911 - Fab Defese

Grips / Funnels for 1911/2011

Polymeric grips with magwell for 1911 - Fab Defense

FD000007

€19.50

Grips / Funnels for 1911/2011

Magwell 1911 (Frame Width 19.7 mm / 0.776 inch) - Xray Parts

XR-MW-1911-S-197

€79.00

Maximum compatible grip width: 19.7 mm / 0.776 inch

Sight / Dot for 1911/2011

Adjustable Rear Sight 1911/2011 Bomar-cut - LPA

LPA-TRT54FU07

€92.70

Grips / Funnels for 1911/2011

Magwell Monarch 2 for 1911 - M-Arms

MA-5001

€89.00

Product available with different options

1911/2011 spare parts

Recoil spring for 1911/2011 Toni System

TS-COLT

€9.00

View

in stock

Thumb rest for 1911/2011

Hold open Thumb rest 1911/2011

HOTR19112011

€82.00

Does not lock the slide back

In stock

1911/2011 spare parts

Titanium Firing Pin 1911/2011

XR-PT1911

€40.00

59mm long Tip diameter 1.60mm Titanium alloy

Available in 15 days

Thumb rest for Tanfoglio

Thumb Rest 10 holes Open - Toni System

TS-AD10OP

€46.50

Left side for right hand shooter

Available in 5 days

Thumb rest for Tanfoglio

Thumb rest 4 holes - Toni System

TS-AD4SX

€45.50

Hole Spacing: 10 mm Left side for Right hand shooter

In stock

Thumb rest for Tanfoglio

Thumb rest 3 holes - Toni System

TS-AD3SX

€41.50

Hole Spacing: 10 mm Left side for right hand shooter

1911 Short grips Vibram Grip - Toni System

Grips / Funnels for 1911/2011

1911 Short grips Vibram Grip - Toni System

TS-G1911VC

€83.00

In Stock

Trigger for 1911/2011

Trigger Straight 2011 - X-Ray Parts

XR-2011-TSF

€32.00

1911/2011 spare parts

Bushing 1911-2011

BT-BU11

€19.90

In stock

Grips / Funnels for 1911/2011

Set of 4 O-rings for fixing the grips - X-Ray Parts

O-RINGS

€3.40

Grips / Funnels for 1911/2011

Screws for fixing 1911 models cheeks - VZ

VZ-19-VT

€26.60

In Stock

Magazine / Base Pad for 1911/2011

13-Coil 2011 Mag Spring - DAA

DAA-101918

€8.40

Caricatore 1911 - 45 - 8 rounds - Nickel

Caricatore 1911 - 45 - 8 rounds - Nickel 2

Product available with different options

Magazine / Base Pad

1911 Magazine cal .45 8rd w/ Plastic Removable Buttplate & Follower

MGCG4508

€27.00

View

Main Spring - Hammer Spring 1911/2011 (Set of 3)

In Stock

1911/2011 spare parts

Firing Pin Spring light 1911/2011 (Set of 2)

GI-1911-FPS

€6.00

DAA 1911/2011 Ambidextrous Safeties with Shields

DAA 1911/2011 Ambidextrous Safeties with Shields 2

In Stock

1911/2011 spare parts

DAA 1911/2011 Ambidextrous Safeties with Shields

DAA-102529

€103.95

NEW Recoil guide and plug STI 2011 and 1911 - Cesar-DVC

NEW Recoil guide and plug STI 2011 and 1911 - Cesar-DVC 2

1911/2011 spare parts

NEW Recoil guide with plug STI 2011 and 1911 - X-ray

XR-GR21920

€74.00

In Stock

Sight / Dot for CZ

Red Dot Mount (Multidot) - Toni System

TS-OPX

€78.00

In Stock

Magazine / Base Pad for 1911/2011

1911 UpLULA Aligning Insert - DAA

DAA-101578

€10.45

In Stock

1911/2011 spare parts

1911/2011 full lenght guide rod Tungsten

11-AGT

€92.00

Weight: 79 grams / 2.79 oz Lenght: 100 mm / 3,937 inch

1911/2011 spare parts

Steel Main Spring Housing 2011 Texture "Checkered 25 LPI"

2011-MSH

€45.00

Recoil Spring Progressive 1911/2011 (Set of 2)

Recoil Spring Progressive 1911/2011 (Set of 2) 2

In Stock

1911/2011 spare parts

Recoil Spring Progressive 1911/2011 (Set of 2) - Amadini Custom

GI-1911-RSP

€15.00

In Stock

Trigger for 1911/2011

Trigger straight 1911 - X-Ray Parts

XR-1911-TS

€32.00

In Stock

1911/2011 spare parts

Extractor for 1911/2011 caliber 9/40 - X-ray parts

XR-19-EA

€84.00

In Stock

1911/2011 spare parts

Hammer Spring 1911/2011 (Set of 3) - Ghost International

GI-1911-HS

€9.00

In Stock

1911/2011 spare parts

Sear Spring 1911/2011

XR-SS11

€12.00

In Stock

1911/2011 spare parts

Hammer Strut 1911/2011

BT-19-HS

€9.50

Product available with different options

1911/2011 spare parts

Hammer Evo Match per 1911/2011

1911-HVE

€43.00

View

Product available with different options

1911/2011 spare parts

Firing Pin Stop 1911/2011 Round Top

11-FPR

€13.00

View

Product available with different options

1911/2011 spare parts

Firing Pin stop 1911/2011 Flat Top

11-FPF

€13.90

View

Product available with different options

1911/2011 spare parts

Hold Open Extended for 1911/2011

11-HOM

€44.90

View

Grips / Funnels for 1911/2011

Grips Operators II VZ

VZ-O2

€77.70

1911 Magwell with Main Spring Housing "25 LPI" - BT

1911 Magwell with Main Spring Housing "25 LPI" - BT 2

In Stock

1911/2011 spare parts

1911 Magwell with Main Spring Housing "25 LPI" - BT

BT-1911-MD2

€89.00

Weight 78 grams

Magazine 1911 - 9 mm - 10 rounds - Metalform

Magazine 1911 - 9 mm - 10 rounds - Metalform 2

In Stock

Magazine / Base Pad

Magazine 1911 - 9 mm - 10 rounds - Metalform

MF-1910

€42.50

Caricatore 1911 - 9mm - 10 rounds - Flush Fit - Anti-Friction

In Stock

Magazine / Base Pad

1911 Magazine - 9mm - 10 rounds - Flush Fit - Anti-Friction - Mec-gar

MGCGOV910AFC

€29.50

Benthley Electro-Dot Sight, Weaver Red-Dot Sight TSX6

Benthley Electro-Dot Sight, Weaver Red-Dot Sight TSX6 2

Sight / Dot for CZ

Red-Dot Sight TSX6 with Weaver Mount - Benthley

BY-TSX6

€287.00

Battery type: cr2032 Not compatible with Glock MOS.

In Stock

1911/2011 spare parts

Sear 1911/2011

BT-SEAR11

€25.00

In Stock

1911/2011 spare parts

Extended Firing Pin for 1911/2011

11-FP-EXT

€30.00

59mm long Point diameter 1.6mm

In Stock

1911/2011 spare parts

Disconnector Match 1911/2011

BT-DISC11

€22.00

In Stock

1911/2011 spare parts

Extractor 1911/2011 caliber 9/40

11-ES-940

€30.00

In Stock

1911/2011 spare parts

Extended magazine release 1911

BT-EMR11-1911

€49.00

In Stock

1911/2011 spare parts

Hold open 1911/2011cal. 9/40/45 - X-ray Parts

XR-11-HO

€36.00

9/40 and 45

In Stock

1911/2011 spare parts

Fiber optic LPA

LPA-FO

€4.00

1911/2011 Wide Ambidextrous Safety - X-Ray Parts

1911/2011 Wide Ambidextrous Safety - X-Ray Parts 2

In Stock

1911/2011 spare parts

1911/2011 Wide Ambidextrous Safety - X-Ray Parts

XR-11SA

€79.00

In Stock

1911/2011 spare parts

1911/2011 full lenght guide rod Steel

XR-STGR-1911

€25.00

1911 Oversize Magwell with Main Spring Housing "Chain Link" - BT

1911 Oversize Magwell with Main Spring Housing "Chain Link" - BT 2

In Stock

1911/2011 spare parts

1911 Extended Magwell with Main Spring Housing "Chain Link" - BT

BT-1911-MDS

€85.00

Weight 78 grams

In Stock

1911/2011 spare parts

Shock Buffer Set for 1911/2011

GI-SB-19112011

€7.00

Reloading Accessories

Uplula Universal Magazine Loader

ML-UP

€33.95

Aluminum standard magwell for 2011 STACCATO P-XC-XL -...

Aluminum standard magwell for 2011 STACCATO P-XC-XL -... 2

Grips / Funnels for 1911/2011

Aluminum standard magwell for 2011 STACCATO P-XC-XL - Toni System

TS-MSTAS-BK

€102.00

Weight 32,5 g / 1,14 oz Material: Aluminum

Standard magwell for Bul M5 - Toni System

Available in 5 days

Grips / Funnels for 1911/2011

Standard magwell for Bul M5 - Toni System

TS-MBM5S-BK

€102.00

Weight 27,7 g / 0.97 oz Material: Aluminum

Scope mount micro red dot connection for STI DVC 2011...

Available in 5 days

Sight / Dot for 1911/2011

Scope mount micro red dot connection for STI DVC 2011 Open post 2015 - Toni System

TS-AMDSTI2

€115.00

Slide width 23,5mm We recommend to use the AD10OP thumb rest Screws included Weight 47g / 1,65oz Material: Aluminum Compatible with: Sti DVC Limited Sti DVC Tactical

Available in 5 days

1911/2011 spare parts

Magazine release button for 1911 with mechanism - Toni System

TS-PSTI1911C

€63.00

Whitout pin and spring Weight 6,6 g / 0,39 oz Material: Aluminum Color : Black

Grips / Funnels for 1911/2011

Short Aluminium Grips X3D for 1911 - Toni System

TS-G19113DC

€99.00

Weight: 53.2 g / 1.87 oz Material: Aluminum Compatible with magwell

Red Dot Dovetail Base Plate for STI 2011 DVC LIMITED -...

Available in 5 days

Sight / Dot for 1911/2011

Red Dot Dovetail Base Plate for STI 2011 DVC LIMITED - Toni System

TS-OPXSDVC

€78.00

Grips / Funnels for 1911/2011

Vibram Grip Brass, Long Size, for 1911 - Toni System

TS-GO1911VL-BR

€88.00

NOT compatible with magwell Grip Screw and grip screw bushing included Material: brass Weight: 171.3 gr / 6,04 oz

Standard Aluminium Magazine Pad for 1911 (Wilson Magazine) - Toni System

Available in 5 days

Magazine / Base Pad for 1911/2011

Standard Aluminium Magazine Pad for 1911 (Wilson Magazine) - Toni System

TS-PADW

€26.00

Weight 11,1 g / 0,39 oz Material: Aluminum

Aluminium Magwell for SHORT Vibram Grips 1911 and Clones - Toni System

Aluminium Magwell for SHORT Vibram Grips 1911 and Clones - Toni System 2

Available in 5 days

Grips / Funnels for 1911/2011

Aluminium Magwell for SHORT Vibram Grips 1911 and Clones - Toni System

TS-MV1911

€96.00

Weight: 32 g Material: Aluminium Recommended for Vibram SHORT Grips Toni System

Brass Magwell for Vibram Short Grip 1911 and Clones - Toni System

Available in 5 days

Grips / Funnels for 1911/2011

Brass Magwell for Vibram Short Grip 1911 and Clones - Toni System

TS-MOV1911-BR

€102.00

Weight: 92 g Material: Brass Recommended for Vibram SHORT Grips Toni System

Brass Magwell for Bul Sas II (IPSC Open Division) - Toni System

Available in 5 days

Grips / Funnels for 1911/2011

Brass Magwell for STI 2011 (IPSC Open Division) - Toni System

TS-MO2011OP-BR

€117.00

Weight: 150 grams

Available in 5 days

Grips / Funnels for 1911/2011

Brass Magwell for Bul Sas II (IPSC Open Division) - Toni System

TS-MOBULOP

€117.00

Weight: 98 grams

Available in 10 days

Thumb rest for Tanfoglio

3 Holes Thumb Rest, Right Side, Left Hand Shooter- Toni System

TS-AD3DX

€40.50

3 Holes thumb rest. Right side for left hand shooter. Screws included. Hole Spacing: 10 mm

Available in 10 days

Thumb rest for 1911/2011

3D Thumb Rest Left Side Right Hand Shooter for STI - Toni System

TS-AD3DSXSTI

€41.80

Hole Spacing: 9,5 mm Left side for right hand shooter

Available in 5 days

Thumb rest for 1911/2011

Thumb Rest 3D for Left Hand Shooter, for STI - Toni System

TS-AD3DDXSTI

€41.80

Hole Spacing: 9,5 mm For Left hand shooter

Magazine / Base Pad for 1911/2011

Magazine Pad Tactical for STI 2011 and Clones - Toni System

TS-PADSTIT

€36.50

Weight 19,3 g / 0,68 oz Material: Aluminum COMPATIBLE WITH MAGWELL

Magazine Pad for STI 2011 and Clones, for Standard...

Magazine Pad for STI 2011 and Clones, for Standard... 2

Available in 5 days

Magazine / Base Pad for 1911/2011

Magazine Pad for STI 2011 and Clones, for Standard Division - Toni System

TS-PADSTIS

€30.00

Weight: 12,3 g / 0,43 oz Material: Aluminimu Compatible with magwell

X3D Grip Brass SHORT, for 1911 and Clones - Toni System

Available in 5 days

Grips / Funnels for 1911/2011

X3D Grip Brass, for 1911 and Clones - Toni System

TS-GO19113DL-BR

€108.00

Weight: 178 g DON'T Fits with Magwell

Available in 5 days

Grips / Funnels for 1911/2011

X3D Grip Brass SHORT, for 1911 and Clones - Toni System

TS-GO19113DC-BR

€108.00

Weight: 164,2 g Fits with Magwell

Compensator for STI 2011 DVC TACTICAL - Toni System

Compensator for STI 2011 DVC TACTICAL - Toni System 2

Available in 5 days

1911/2011 spare parts

Compensator for STI 2011 DVC TACTICAL - Toni System

TS-STITV6MI-BK

€130.00

US & California Disclaimer: By placing this order, you accept full responsibility for complying with federal, state, and local laws (including California regulations)

Aluminium Tatcical Magwell 2011 Black - Toni System

Aluminium Tatcical Magwell 2011 Black - Toni System 2

Available in 5 days

Grips / Funnels for 1911/2011

Aluminium Tactical Magwell 2011 Black - Toni System

TS-M2011T-BK

€109.00

Available in 5 days

Sight / Dot for 1911/2011

Micro Red-Dot Mount, for STI - Toni System

TS-AMDSTI

€115.00

Aluminium 4mm base pads for 2011/SAS magazine, black - RC...

Aluminium 4mm base pads for 2011/SAS magazine, black - RC... 2

Out-of-Stock

Magazine / Base Pad for 1911/2011

Aluminium 4mm base pads for 2011/SAS magazine, black - RC Tech

RC-2011-04-BLK

€34.00

View

2011 magazine pad for Division Optics, black - GPMAX

2011 magazine pad for Division Optics, black - GPMAX 2

Out-of-Stock

Magazine / Base Pad for 1911/2011

2011 magazine pad for Division Optics, black - GPMAX

ARP-PAD-2011-N

€27.00

View

Brass 3mm base pads for 2011/SAS magazine - RC Tech

Brass 3mm base pads for 2011/SAS magazine - RC Tech 2

Out-of-Stock

Magazine / Base Pad for 1911/2011

Brass 3mm base pads for 2011/SAS magazine - RC Tech

RC-2011-03-BR

€37.00

View

Brass pad +3/4 rounds for SAS/ Para Ordnance magazines -...

Brass pad +3/4 rounds for SAS/ Para Ordnance magazines -... 2

Out-of-Stock

Magazine / Base Pad for 1911/2011

Brass pad +3/4 rounds for SAS/ Para Ordnance magazines - RC Tech

RC-SAS141-BRASS

€45.00

View

Operators II grips with The Punisher engrave, hyena brown...

Out-of-Stock

Grips / Funnels for 1911/2011

Operators II grips with The Punisher engrave, hyena brown - VZ

VZ-CK-02-HB-A

€80.00

View

Red dot plate A12B for 1911 DS/1911 for Shield RMS/SMS -...

Red dot plate A12B for 1911 DS/1911 for Shield RMS/SMS -... 2

Out-of-Stock

Sight / Dot for 1911/2011

Red dot plate A12B for 1911 DS/1911 for Shield RMS/SMS - Springfield Armory

SA-PH5077N-A12B

€170.00

Compatible with: HEX Wasp Holosun 507K-X2 Holosun 407K-X2 Shield RMSc Shield SMSc Shield RMS2 Swampfox Sentinal Bushnell RXC-200 / RXU-200

View

Red dot plate A14B for 1911 DS/1911 for Trijicon RMR -...

Red dot plate A14B for 1911 DS/1911 for Trijicon RMR -... 2

Out-of-Stock

Sight / Dot for 1911/2011

Red dot plate A14B for 1911 DS/1911 for Trijicon RMR - Springfield Armory

SA-PH5077N-A14B

€170.00

Compatible with: Trijicon RMR Trijicon SRO Holosun 407C-X2 Holosun 507C-X2 Holosun 508T Riton X3 Tactix Swampfox Justice Bushnell RXM-300

View

Out-of-Stock

Sight / Dot for 1911/2011

Sight with fiber optic 1 mm for Kimber/Springfield-Armory/Girsan/clones 1911 - Toni System

TS-MK1R

€30.00

Material: Aluminum Measures: base width 8,40mmx60° Compatibility: 1911 Kimber 1911 ADC 1911 e cloni

View

Flat trigger for 1911, gold - X-Ray Parts

Out-of-Stock

Trigger for 1911/2011

Flat trigger for 1911, gold - X-Ray Parts

XR-1911-FLT-GD

€32.00

Trigger Length: 14.4 mm Total Length: 59.50 mm

View

Out-of-Stock

Sight / Dot for 1911/2011

Sight with fiber optic 2 mm for Kimber/Springfield-Armory/Girsan/clones 1911 - Toni System

TS-MK2R

€30.00

Material: Aluminum Measures: base width 8,40mmx60° Compatibility: 1911 Kimber 1911 ADC 1911 e cloni

View

Out-of-Stock

Sight / Dot for 1911/2011

Sight with fiber optic 1,5 mm for Kimber/Springfield-Armory/Girsan/clones 1911 - Toni...

TS-MK15R

€30.00

Material: Aluminum Measures: base width 8,40mmx60° Compatibility: 1911 Kimber 1911 ADC 1911 e cloni

View

Curved trigger for 1911 and clones, standard length -...

Curved trigger for 1911 and clones, standard length -... 2

Out-of-Stock

Trigger for 1911/2011

Curved trigger for 1911 and clones, standard length - X-Ray Parts

XR-1911-SL-C

€29.00

Trigger length: 11mm Total length: 55.90mm

View

20-Round Magazine 9mm for Springfield Prodigy -...

20-Round Magazine 9mm for Springfield Prodigy -... 2

Out-of-Stock

Magazine / Base Pad for 1911/2011

20-Round Magazine 9mm for Springfield Prodigy - Springfield Armory

SA-PH6920

€69.00

View

Standard 1911Pad for Metalform Magazine - Toni System

Out-of-Stock

Magazine / Base Pad for 1911/2011

Standard 1911Pad for Metalform Magazine - Toni System

TS-PADMFRO-BR

€30.00

Weight 33,8 g / 1,19 oz Material: Brass

View

1911 Steel Magazine Base Pad for Mec-Gar / SF Meccanica...

1911 Steel Magazine Base Pad for Mec-Gar / SF Meccanica... 2

Out-of-Stock

Magazine / Base Pad for 1911/2011

1911 Steel Magazine Base Pad for Mec-Gar / SF Meccanica Magazine - BT

BT-1911-PADMAG

€19.50

Weight: 37 grams Material: Steel Chromed

View

Grips for 1911 Full Size in G10 FS1911 Palm Swell Veloce...

Out-of-Stock

Grips / Funnels for 1911/2011

Grips for 1911 Full Size in G10 FS1911 Palm Swell Veloce (Slip-On Magwell) - Lok Grips

LG-1911PSV-B-SO

€81.00

View

Palm Swell GridLOK Aluminium Grips 1911 Full Size,...

Palm Swell GridLOK Aluminium Grips 1911 Full Size,... 2

Out-of-Stock

Grips / Funnels for 1911/2011

Palm Swell GridLOK Aluminium Grips 1911 Full Size, texture Aggressive, Black - Lok Grips

LG-1911PSGLA-B-FS-FL

€93.00

Magwell Cut Screws,low profile bushing and O-rings included

View

Magazine Catch Lock Pin (with spring) for 1911 / 2011 - BT

Out-of-Stock

1911/2011 spare parts

Magazine Catch Lock Pin (with spring) for 1911 / 2011 - BT

BT-1911-MCLP-WS

€9.50

View

Out-of-Stock

1911/2011 spare parts

Oversized Magazine Catch Button 1911/ 2011 - BT

BT-1911-OSRB

€13.00

View

Match Magazine for 1911 cal. 45 8rd with Polymer Base Pad - Mec-Gar

Out-of-Stock

Magazine / Base Pad

Match Magazine for 1911 cal. 45 8rd with Polymer Base Pad - Mec-Gar

MGCG4508MATCH

€28.00

View

Red Dot Mount Benthley TSX6 / C-More RTS2 for STI - Erredi Trading

Out-of-Stock

Sight / Dot for 1911/2011

Red Dot Mount Benthley TSX6 / C-More RTS2 for STI - Erredi Trading

PR_02-2016_02

€90.00

Material: Aluminium

View

Standard Aluminium Magazine Pad for 1911 (Mec-Gar Magazine) - Toni System

Out-of-Stock

Magazine / Base Pad for 1911/2011

Standard Aluminium Magazine Pad for 1911 (Mec-Gar Magazine) - Toni System

TS-PADMNS

€26.00

Weight 11,1 g / 0,39 oz Material: Aluminum

View

Threadlocker 111 Low Strength - Vibra-TITE

Out-of-Stock

Tools / Workshop Equipment

Threadlocker 111 Low Strength - Vibra-TITE

VT-VTTL-111

€3.50

View

2011 STI Adjustable Thumbrest - Boss Components

Out-of-Stock

Thumb rest for 1911/2011

2011 STI Adjustable Thumbrest - Boss Components

BC-2011-ADJTHB

€39.95

View

Out-of-Stock

Trigger for 1911/2011

Curved Trigger 2011 - X-Ray Parts

XR-2011-TS2

€32.00

View

Progressive Hammer Spring (8 Lb) for 1911/2011 - MVM

Out-of-Stock

1911/2011 spare parts

Progressive Hammer Spring (9 Lb) for 1911/2011 - MVM

MVM-05440

€15.00

View

Firing Pin Spring Light, for 1911 / 2011 - MVM

Out-of-Stock

1911/2011 spare parts

Firing Pin Spring Light, for 1911 / 2011 - MVM

MVM-04492

€5.00

View

1911/2011 Plunger Tube Assembly - X-Ray Parts

1911/2011 Plunger Tube Assembly - X-Ray Parts 2

Out-of-Stock

1911/2011 spare parts

1911/2011 Plunger Tube Assembly - X-Ray Parts

XR-PT-ASS

€12.00

View

Out-of-Stock

Grips / Funnels for 1911/2011

Grips for 1911 Full Size BOGIES in G10, Standard profile, with Thumb Relief - Lok Grips

LG-1911BB

€73.00

View

Out-of-Stock

Reloading Accessories

Mec-Loader Universal Magazine Loader, For Pistol Cal 9/40/45/ - Mec-gar

CR004811

€16.00

View

Cobblestone Rubber Grips for Colt Government 1911 - Hogue

Cobblestone Rubber Grips for Colt Government 1911 - Hogue 2

Out-of-Stock

Grips / Funnels for 1911/2011

Cobblestone Rubber Grips for Colt Government 1911 - Hogue

HG-45000

€47.00

View

1911 Monarch Grips and Magwell BRASS set - M-Arms

Out-of-Stock

Grips / Funnels for 1911/2011

1911 Monarch Grips and Magwell BRASS set - M-Arms

MA-20057

€215.00

View

Magazine spring for metalform 1911 magazine (10 rounds) -...

Out-of-Stock

1911/2011 spare parts

Magazine spring for metalform 1911 magazine (10 rounds) - Toni System

TS-MCMF

€9.00

View

Out-of-Stock

Trigger for 1911/2011

Trigger Hexagon for 1911 - X-Ray Parts

XR-1911TH

€32.00

View

Trigger Hexagon Double Stack for 2011 - X-Ray Parts

Trigger Hexagon Double Stack for 2011 - X-Ray Parts 2

Out-of-Stock

Trigger for 1911/2011

Trigger Hexagon Double Stack for 2011 - X-Ray Parts

XR-2011TH

€32.00

View

Out-of-Stock

Trigger for 1911/2011

Trigger Stars Double Stack for 2011 - X-Ray Parts

XR-2011TS

€32.00

View

Out-of-Stock

Trigger for 1911/2011

Trigger Stars for 1911 - X-Ray Parts

XR-1911-TS-STARS

€32.00

View

1911 Set Monarch 2 Short Grips and Magwell - M-Arms

1911 Set Monarch 2 Short Grips and Magwell - M-Arms 2

Out-of-Stock

Grips / Funnels for 1911/2011

1911 Set Monarch 2 Short Grips and Magwell - M-Arms

MA-20050

€155.00

View

Out-of-Stock

Magazine / Base Pad for 1911/2011

11-Coil 2011 Mag Spring - DAA

DAA-101915

€8.00

View

Ambidextrous safety 1911/2011 Swenson Style - X-Ray Parts

Ambidextrous safety 1911/2011 Swenson Style - X-Ray Parts 2

Out-of-Stock

1911/2011 spare parts

Ambidextrous safety 1911/2011 Swenson Style - X-Ray Parts

XR-19AS

€94.00

Swenson Style

View

Out-of-Stock

1911/2011 spare parts

Racer Match Hammer for 1911/2011

1911-HRC

€48.00

View

Caricatore 1911 - 45 - 11 rounds - Extended - Nickel

Out-of-Stock

Magazine / Base Pad

1911 Magazine - COLT 45 - 11 rounds - Extended - Mec-gar

MGCG4511

€33.00

View

Showing 1-232 of 232 item(s)